stainless steel 316, for on-board or offshore applications

  • The stainless steel boot and shoe dryers AIR are connected to the warm-air blower FLOW300. A warm and fast drying of any type of shoes and boots by using a large amount of AIR, which flows through a continuous stainless steel frame and rounded hangers. Drying with slightly warmed up air is gentle on all materials. Drying time of approx. 30 min – 2 hours.
    They are optionally available with timers. This ensures an easy handling of the systems, so that by switching on the timers everybody can quickly start the dryers. Pronomar’s range is available from 5 up to 30 pairs of shoes or boots, in a single or double sided configuration. The system is suitable for the drying of not only boots and shoes, but also gloves, helmets, life vests and other types of equipment.
  • Depending on the type and thickness of your coveralls, you can choose between different drying hangers. Furthermore, the hangers are available in three length-sizes. In case not all drying hangers are needed, it is possible to close off several coupling sections to guide the full air capacity to the occupied hangers.

    Coveralls are most often used to protect the work force from any dangers which may occur on the work floor. This also means that coveralls have to be worn in extremely warm or cold environments or at locations where the work wear can get wet. In all these circumstances, dry outfits are highly appreciated by the crew.

  • The COMBO dryer enables a fast and careful drying of jackets and boots. Warm air is conducted through continuous stainless steel tubes and emerges via nozzles. This ensures a careful and efficient inside drying and prolongs the lifespan of the materials by 2-3 times.

  • With the DUO drying system, working clothes, footwear and gloves can be efficiently dried within a short amount of time. The work gear is dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The hangers contain nozzles, through which the air enters the clothing.

    It is also possible to combine the DUO dryer with headgear dryers, which can be placed on top of the air tube. Please specify, if required, when requesting the drying system.

  • Three types of jacket dryers are available. We offer systems with hangers made for heavy and light work jackets, but also with regular hangers.

    Pronomar can offer drying systems for various applications due to a flexible one-hand coupling system. Depending on the type and thickness of your PPE you can choose between our different body-shaped drying hangers and length-sizes.

    The jackets are dried by using a large amount of air, which flows through the continuous stainless steel framework and body-shaped hangers. The hangers contain nozzles, through which the air enters the clothing, reaching all areas.

  • A warm and fast drying of all gloves by using a large amount of air, which flows through the continuous stainless steel framework and rounded hangers. The hangers contain nozzles, through which the air enters the gloves. One of the main advantages of drying with slightly warmed up air is that it is particularly gentle on materials such as leather and high-tech fabrics. Finally, because of the equal and constant air flow, all gloves are dried within a short amount of time approx. 1-2 hours, ensuring that the people can start their next shift warm and dry.

  • Professional and robust sitting benches, completely or partly made from stainless steel (304) or seawater resistant steel (316). The ready-equipped sitting benches are to be used for floor placement. Different lengths are available.

    After clicking on ‘add to quote’ and ‘see your request list’, on the bottom of the following page please let us know more about your preferred dimensions of the sitting bench. In this way, we can think of the most suitable personalized solution.

  • A warm drying of all footwear by using electrically heated hangers. The ELEDRY systems are completely made of stainless steel, are a plug-and-play solution, environment-friendly and economically priced. Besides that, they are entirely maintenance-free and guaranteed for a full warranty period of 8 years. The drying time with the ELEDRY system is approx. 4-5 hours depending on material and degree of humidity. Additionally, the minimum room temperature required in the room is 12 °C. In case you are looking for the fastest drying option, please have a look at the boot dryers AIR with air blower FLOW300.

    The systems are available for wall-mounted and freestanding configurations and can be made from stainless steel 304 and seawater resistant steel 316. You can choose to dry a total of 5, 10, 15, 20 or 30 pairs of boots, shoes or gloves.

  • Upside Down Dryer

    Pronomar’s upside down dryers are extremely suitable for the drying of professional drysuits or chemical protection suits, as this type of PPE must be kept in perfect condition at all times. That is why the drying systems are particularly beneficial also for training and education stations, since they make sure that the suits are available again dry and ready to use.

    With the protection suit or diving suit dryer, all types of suits are dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The main advantage of this system is that no water can remain in the feet and only 2 suits are dried on one powerful warm-air blower.

  • Pronomar’s robust DUAL boot dryer combines the best of both worlds and dries the gear from the inside out by means of both electrically heated hangers and a freely adjustable air flow.

    +   

    This compact plug-and-play system is ideal for the smaller applications. On the uniquely designed rounded hangers you can dry all kinds of footwear, gloves and headwear.

    available for 2 or 4 pairs of boots, shoes or gloves:

    2 pairs: W 29 x H 55/85 x D 38/48cm 4 pairs: W 58 x H 55/85 x D 38/48cm

  • A warm drying of gloves by using electrically heated hangers. The ELEDRY systems are completely made of stainless steel, are a plug-and-play solution, environment-friendly and economically priced. Besides that, they are entirely maintenance-free and guaranteed for a full warranty period of 8 years. The drying time with the ELEDRY system is approx. 4-5 hours depending on material and degree of humidity. Additionally, the minimum room temperature required in the room is 12 °C. In case you are looking for the fastest drying option, please have a look at the glove dryers AIR with air blower FLOW300.

    The electrical glove dryer is available for wall-mounted and freestanding configurations, made from stainless steel 304 or seawater resistant steel 316. The systems are available for 3+3 (3 pairs of gloves + 3 pairs of boots), 7, 10, 20, or 30 pairs.

  • Next to the drying solutions, we also provide stainless steel storage racks. An important advantage of the storage racks is that the work clothes can be gathered and hung together in one place, which results in an organized changing room. Pronomar provides wall-mounted, ceiling-mounted as well as freestanding or mobile solutions, which transform your mud room in an exceptionally tidy space.

    After clicking on 'add to quote' and 'see your request list', on the bottom of the following page please let us know more about your available space and feel free to add a picture or drawing. In this way, we can think of the most suitable personalized solution.

Title

Go to Top