Request a quotation by selecting one of our products

  • The stainless steel boot and shoe dryers AIR are connected to the warm-air blower FLOW300. A warm and fast drying of any type of shoes and boots by using a large amount of AIR, which flows through a continuous stainless steel frame and rounded hangers. Drying with slightly warmed up air is gentle on all materials. Drying time of approx. 30 min – 2 hours.
    They are optionally available with timers. This ensures an easy handling of the systems, so that by switching on the timers everybody can quickly start the dryers. Pronomar’s range is available from 5 up to 30 pairs of shoes or boots, in a single or double sided configuration. The system is suitable for the drying of not only boots and shoes, but also gloves, helmets, life vests and other types of equipment.
  • Depending on the type and thickness of your coveralls, you can choose between different drying hangers. Furthermore, the hangers are available in three length-sizes. In case not all drying hangers are needed, it is possible to close off several coupling sections to guide the full air capacity to the occupied hangers.

    Coveralls are most often used to protect the work force from any dangers which may occur on the work floor. This also means that coveralls have to be worn in extremely warm or cold environments or at locations where the work wear can get wet. In all these circumstances, dry outfits are highly appreciated by the crew.

  • The COMBO dryer enables a fast and careful drying of jackets and boots. Warm air is conducted through continuous stainless steel tubes and emerges via nozzles. This ensures a careful and efficient inside drying and prolongs the lifespan of the materials by 2-3 times.

  • With the DUO drying system, working clothes, footwear and gloves can be efficiently dried within a short amount of time. The work gear is dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The hangers contain nozzles, through which the air enters the clothing.

    It is also possible to combine the DUO dryer with headgear dryers, which can be placed on top of the air tube. Please specify, if required, when requesting the drying system.

  • Three types of jacket dryers are available. We offer systems with hangers made for heavy and light work jackets, but also with regular hangers.

    Pronomar can offer drying systems for various applications due to a flexible one-hand coupling system. Depending on the type and thickness of your PPE you can choose between our different body-shaped drying hangers and length-sizes.

    The jackets are dried by using a large amount of air, which flows through the continuous stainless steel framework and body-shaped hangers. The hangers contain nozzles, through which the air enters the clothing, reaching all areas.

  • A warm and fast drying of all gloves by using a large amount of air, which flows through the continuous stainless steel framework and rounded hangers. The hangers contain nozzles, through which the air enters the gloves. One of the main advantages of drying with slightly warmed up air is that it is particularly gentle on materials such as leather and high-tech fabrics. Finally, because of the equal and constant air flow, all gloves are dried within a short amount of time approx. 1-2 hours, ensuring that the people can start their next shift warm and dry.

  • The ELA – Pronomar Drying Container is available for rent and sale. It is equipped with drying systems suitable to dry work overalls, survival suits, jacket/trousers combinations etc. as well as work boots, shoes or gloves.

    All drying systems are made from solid stainless steel 304 for onshore applications and seawater resistant steel 316 for offshore.

    The drying systems dry the clothes efficiently from the inside by means of a large amount of warm air, coming from a powerful warm-air blower.

    Details
  • With the COMBO drying cabinet, sets of workwear (jackets and boots) can be efficiently dried within a short amount of time. The work gear is dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The hangers contain nozzles, through which the air enters the clothing.

    The cabinets are made of fully-galvanized sheet steel, powder coated.

    Optional hangers for gloves on inside of doors
  • Professional and robust sitting benches, completely or partly made from stainless steel (304) or seawater resistant steel (316). The ready-equipped sitting benches are to be used for floor placement. Different lengths are available.

    After clicking on ‘add to quote’ and ‘see your request list’, on the bottom of the following page please let us know more about your preferred dimensions of the sitting bench. In this way, we can think of the most suitable personalized solution.

  • Pronomar’s professional boot cleaner is ideal for tough use by e.g. industrial or maritime organisations (e.g. polar expedition cruise vessels), but also fire stations, police departments, the military, commercial and agricultural organizations can make use of the boot cleaner. It has a great robustness and flexibility. With everything made from solid stainless steel 316 (with seawater resistant quality), the frame, casing and fittings have a long service life, with extended warranty of 5 years.

    Details
  • A warm drying of all footwear by using electrically heated hangers. The ELEDRY systems are completely made of stainless steel, are a plug-and-play solution, environment-friendly and economically priced. Besides that, they are entirely maintenance-free and guaranteed for a full warranty period of 8 years. The drying time with the ELEDRY system is approx. 4-5 hours depending on material and degree of humidity. Additionally, the minimum room temperature required in the room is 12 °C. In case you are looking for the fastest drying option, please have a look at the boot dryers AIR with air blower FLOW300.

    The systems are available for wall-mounted and freestanding configurations and can be made from stainless steel 304 and seawater resistant steel 316. You can choose to dry a total of 5, 10, 15, 20 or 30 pairs of boots, shoes or gloves.

  • A perfect solution for all your problems with scaling, corrosion, biofouling and barnacles offers the unique Merus technology. This technology, which basically consists of a ring that is installed around the pipes in question, gives off molecular oscillations disturbing the lime scale, rust, bacteria, algae etc. in your fresh- or seawater lines and applications. Afterwards, the substances are flushed away leaving water lines and applications mostly free of harmful build-up and bringing them back to high performance levels.

    Different types of Merus rings:
    • Industrial (IND) For low volume applications struggling with lime scale and corrosion issues (boilers, water heaters).
    • Industrial (IND) BIO If issues with biofilm and seagrowth (e.g. algae, aquatic plants, barnacles and hard shells) occur in these low volume applications, the Industrial BIO ring will provide a solution.
    • HCI For high volume applications struggling with lime scale and corrosion issues (cooling water systems, heat exchangers).
    • HCI BIO If issues with biofilm and seagrowth (e.g. algae, aquatic plants, barnacles and hard shells) occur in these high volume applications, the HCI BIO ring will provide a solution.
  • Upside Down Dryer

    Pronomar’s upside down dryers are extremely suitable for the drying of professional drysuits or chemical protection suits, as this type of PPE must be kept in perfect condition at all times. That is why the drying systems are particularly beneficial also for training and education stations, since they make sure that the suits are available again dry and ready to use.

    With the protection suit or diving suit dryer, all types of suits are dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The main advantage of this system is that no water can remain in the feet and only 2 suits are dried on one powerful warm-air blower.

  • Pronomar’s robust DUAL boot dryer combines the best of both worlds and dries the gear from the inside out by means of both electrically heated hangers and a freely adjustable air flow.

    +   

    This compact plug-and-play system is ideal for the smaller applications. On the uniquely designed rounded hangers you can dry all kinds of footwear, gloves and headwear.

    available for 2 or 4 pairs of boots, shoes or gloves:

    2 pairs: W 29 x H 55/85 x D 38/48cm 4 pairs: W 58 x H 55/85 x D 38/48cm

  • With the DUO drying cabinet, working clothes, footwear and gloves can be efficiently dried within a short amount of time. The work gear is dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The hangers contain nozzles, through which the air enters the clothing.

    The cabinets are made of fully-galvanized sheet steel, powder coated.

    Also possible: add hangers on top of the air tube to dry hoods or caps
  • With the ELEDRY® boot drying cabinet, footwear is dried from the inside out, because of electrically heated hangers. With this cabinet not only boots, but also shoes and gloves can be dried.

    The cabinets are made of fully-galvanized sheet steel, powder coated.

    Ideal also for drying overnight!

  • With the coverall drying cabinet, overalls, jackets/trousers, survival suits, etc. can be efficiently dried within a short amount of time. The work gear is dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The hangers contain nozzles, through which the air enters the clothing.

    The cabinets are made of fully-galvanized sheet steel, powder coated.

    Optionally available with trouser hooks, for fitting a combination of jackets and trousers without braces

  • A warm drying of gloves by using electrically heated hangers. The ELEDRY systems are completely made of stainless steel, are a plug-and-play solution, environment-friendly and economically priced. Besides that, they are entirely maintenance-free and guaranteed for a full warranty period of 8 years. The drying time with the ELEDRY system is approx. 4-5 hours depending on material and degree of humidity. Additionally, the minimum room temperature required in the room is 12 °C. In case you are looking for the fastest drying option, please have a look at the glove dryers AIR with air blower FLOW300.

    The electrical glove dryer is available for wall-mounted and freestanding configurations, made from stainless steel 304 or seawater resistant steel 316. The systems are available for 3+3 (3 pairs of gloves + 3 pairs of boots), 7, 10, 20, or 30 pairs.

  • Jo Bird’s robust, high performance GRP cabinets combined with Pronomar’s drying equipment with fast coupling system and virtually indestructible stainless steel fittings make for a formidable pairing.

    The highly efficient drying method inside the GRP drying cabinets uses warm-air conducted through continuous stainless steel tubes and via nozzles directly into the clothes. The GRP cabinets can withstand temperatures of -40°C to +50°C, and defy the destructive forces of water, ice, sand, dust and wind.

    The drying cabinets can be customised precisely to your specification. We also offer interior fittings to dry life vests, re-breathers etc.

    Details
  • Jo Bird’s robust, high performance GRP cabinets combined with Pronomar’s drying equipment with fast coupling system and virtually indestructible stainless steel fittings make for a formidable pairing.

    The highly efficient drying method inside the GRP drying cabinets uses warm-air conducted through continuous stainless steel tubes and via nozzles directly into the clothes. The GRP cabinets can withstand temperatures of -40C to +50C, and defy the destructive forces of water, ice, sand, dust and wind.

    The drying cabinets can be customised precisely to your specification. We also offer fittings to dry life vests, re-breathers etc.

    Details
  • The ELA – Pronomar Drying Container is available for rent and sale. It is equipped with drying systems suitable to dry work overalls, survival suits, jacket/trousers combinations etc. as well as work boots, shoes or gloves.

    All drying systems are made from solid stainless steel 304 for onshore applications and seawater resistant steel 316 for offshore.

    The drying systems dry the clothes efficiently from the inside by means of a large amount of warm air, coming from a powerful warm-air blower.

    Details
  • With the AIR boot drying cabinet, footwear is dried from the inside out, by using a large amount of warm air which flows through the continuous stainless steel framework and hangers. The hangers contain nozzles, through which the air enters the footwear. With this cabinet not only boots, but also shoes and gloves can be dried.

    The cabinets are made of fully galvanized sheet steel, powder coated.

    The material of the drying systems can be either stainless steel 304 or seawater resistant steel 316.

    You can choose your cabinet for 10, 15 or 20 pairs of boots, shoes or gloves.

  • Pronomar’s professional boot cleaner is ideal for tough use by e.g. industrial or maritime organisations (e.g. polar expedition cruise vessels), but also fire stations, police departments, the military, commercial and agricultural organizations can make use of the boot cleaner. It has a great robustness and flexibility. With everything made from solid stainless steel 316 (with seawater resistant quality), the frame, casing and fittings have a long service life, with extended warranty of 5 years.

  • Pronomar’s professional boot cleaner is ideal for tough use by e.g. industrial or maritime organisations (e.g. polar expedition cruise vessels), but also fire stations, police departments, the military, commercial and agricultural organizations can make use of the boot cleaner. It has a great robustness and flexibility. With everything made from solid stainless steel 316 (with seawater resistant quality), the frame, casing and fittings have a long service life, with extended warranty of 5 years.

    Details

Title

Go to Top