WATER Drying Systems

WATER

Pronomar’s water systems are heated with warm water. This warm water, which is conducted through the rounded stainless steel hangers, facilitates a gentle and efficient drying from the inside out. The WATER drying systems are completely soundless and ideal for overnight drying. In addition, this systems is connected to your existing central heating, which ensures a seamless integration with your infrastructure for efficient and practical drying.

Recommendations for Water drying systems

When opting for our water drying systems there are a few tips and recommendations.

For large-scale projects, opting for the installation of panels according to the “TICHELMANN” system is advisable. This will ensure a maximum flow temperature of 45°C, with a constant value control set on-site to optimize performance. We recommended to install a separate heating pump for the dryers, a task to be carried out by your plumber based on individual project requirements.

Venting facilities are not required for this system. However, for enhanced control and maintenance, it is advisable to install stop valves and at least one rinsing possibility per installation on-site. This ensures a comprehensive and efficient setup, aligning with the specific needs of your project.

FAQ's

Do the drying systems have radial fans?

Pronomar’s blowers do not make use of radial fans (most of which make under 3.000 RPM and are not suitable for blowing continuously in small stainless steel tubes) and heating elements. In non-stop operation these two aspects combines can result in overheating due to too much counter pressure.

How efficient are the drying systems in terms of energy?

Go to the main page to have a read on how energy efficient the drying systems are.

How much room do I need?

Pronomar’s flexible and modular systems fit in all rooms; from small niches to complete large-scale drying rooms. For your personalised drying room, we provide a free AutoCAD engineering service.

What is the warranty on the drying systems?

There is a warranty of 8 years on all stainless steel drying racks and 2 years or 5.500 hours of operation on the warm-air blowers FLOW300.

Get in Touch!

Please fill in our contact form and we will contact you as soon as possible. Because this is a specific type of system we ask to be as specific as possible when filling out the form.

This field is for validation purposes and should be left unchanged.